Charm++ parallel programming system

["曹维" <caowei193 AT gmail.com>]

After I entered the directory  charm/examples/bigsim/tools/rewritelog/ , I
executed the command: "make interpolatelog", and took
"sample_namd_timings.txt" which was in the directory
charm/examples/bigsim/tools/rewritelog/traceBigSim  as CYCLE_TIMES_FILE.
when I execute the program "interpolatelog", the result shows this :

The following table displays the number of timing samples from
 the cycle-accurate file for each event.

        |===========================|==========================|
        |                            event                         | number
of timing samples |
        |------------------------|----------------------|
        |                                 angles,  0
|                         9     |
 |    calc_pair_energy_fullelect,  1 |                      22     |
        |    calc_pair_energy_fullelect,  2 |                       8     |
        |    calc_pair_energy_fullelect,  3 |                       18     |
        |    calc_pair_energy_fullelect,  4 |                        8     |
        |    calc_pair_energy_fullelect,  5 |                       24     |
        |    calc_pair_energy_fullelect,  6 |                        7     |
        |    calc_pair_energy_fullelect,  7 |                       21     |
        |    calc_pair_energy_fullelect,  8 |                        9     |
        |    calc_pair_energy_fullelect,  9 |                       18     |
        |    calc_pair_energy_fullelect, 10 |                       20     |
        |    calc_pair_energy_fullelect, 11 |                       19     |
        |    calc_pair_energy_fullelect, 12 |                       14     |
        |    calc_pair_energy_fullelect, 13 |                       26     |
        |    calc_pair_energy_fullelect, 14 |                       13     |
        |    calc_pair_energy_fullelect, 15 |                       14     |
        |    calc_pair_energy_fullelect, 16 |                        6     |
        |    calc_pair_energy_fullelect, 17 |                       28     |
        |    calc_pair_energy_fullelect, 18 |                       20    |
        |    calc_pair_energy_fullelect, 19 |                       17     |
        |    calc_pair_energy_fullelect, 20 |                       16     |
        |    calc_pair_energy_fullelect, 21 |                       20     |
        |    calc_pair_energy_fullelect, 22 |                       15     |
        |    calc_pair_energy_fullelect, 23 |                       21     |
        |    calc_pair_energy_fullelect, 24 |                       13    |
        |    calc_pair_energy_fullelect, 25 |                       20     |
        |    calc_pair_energy_fullelect, 26 |                       10     |
        |    calc_pair_energy_fullelect, 27 |                       20     |
        |    calc_pair_energy_fullelect, 28 |                        7     |
        |    calc_pair_energy_fullelect, 29 |                       18     |
        |    calc_pair_energy_fullelect, 30 |                       13     |
        |    calc_pair_energy_fullelect, 31 |                       12     |
        |    calc_pair_energy_fullelect, 32 |                        7     |
        |    calc_pair_energy_fullelect, 33 |                       19     |
        |    calc_pair_energy_fullelect, 34 |                        5     |
FATAL ERROR: Not enough input timing samples for
calc_pair_energy_fullelect,34 which has 6 coefficients
terminate called after throwing an instance of 'std::runtime_error*'

Did I do something wrong or there was something wrong with the file
"sample_namd_timings.txt" ?