Charm++ parallel programming system

[Xuehan Xu <xxhdx1985126 AT gmail.com>]

Dear Sirs:
      I tried to simulate the Cjacobi3D program with the parameter "+wth4", but some assertion error occured when running BigNetSim.
      I used the emulator to run the program with "+wth4" like the following:
./charmrun +p1 ./jacobi 4 4 2 +x2 +y2 +z2 +wth4 ++remote-shell ssh +bglog
      Then I moved the traces to BigNetSim/trunk/BlueGene/ and ran the BigNetSim:

[couple@node70 BlueGene]$ ../tmp/charmrun +p1 ../tmp/bigsimulator 1 0 ++remote-shell ssh
Charmrun> started all node programs in 2.110 seconds.
Converse/Charm++ Commit ID: v6.3.0-626-gf074431
Charm++> scheduler running in netpoll mode.
Charm++> Running on 1 unique compute nodes (2-way SMP).
Charm++> cpu topology info is gathered in 0.001 seconds.
================= Simulation Configuration =================
Number of physical PEs: 1
POSE mode: Parallel
Network model: BlueGene
Command line: /home/couple/NewCharm/BigNetSim/trunk/BlueGene/../tmp/bigsimulator 1 0
Timing factor: 1.000000e+08 (i.e., 1 GVT tick = 10 ns)
cpufactor: 1.000000
bgTrace summary: totalBGProcs=32 X=2 Y=2 Z=2 #CommThreads=1 #WorkerThreads=4 #PEs=1 LogVersion=6
Simulation mode: trace driven
Simulation network mode: full contention
Initializing POSE...  
POSE initialization complete.
Using Inactivity Detection for termination.
Network parameters:
   Max packet size: 256
   File window size: 0
   Debug print level: 0
   Window load threshold: 0
   Intra node latency: 0.500000 us
   Intra node bandwidth: 1.000000 GB/s
   Number of buffers per port in each switch: 12
   Switch buffer size: 1024
   Channel bandwidth: 1.000000
   Channel delay: 0
   Link stats collection interval: 1000000 GVT ticks
   Link stats on: no
   Message stats on: no
   Adaptive routing on: yes
   Header size: 16 bytes
   Processor send overhead: 0 GVT ticks
   Processor receive overhead: 0 GVT ticks
   Number of simulated nodes: 8
============================================================
Info> invoking startup task from proc 0 ...
Info> Starting at the beginning of the simulation
Info> Running to the end of the simulation
[0] Assertion "inPort == numP" failed in file modDirectionOrderedNDTorus.C line 29.
------------- Processor 0 Exiting: Called CmiAbort ------------
Reason: 
[0] Stack Traceback:
  [0:0] CmiAbort+0x75  [0x82b7130]
  [0:1] __cmi_assert+0x3c  [0x82bfdb7]
  [0:2] _ZN26modDirectionOrderedNDTorus11selectRouteEiiiP8TopologyP6PacketRSt3mapIiiSt4lessIiESaISt4pairIKiiEEESC_Pt+0x187  [0x818b56d]
  [0:3] _ZN10SwitchBase10recvPacketEP6Packet+0x5d1  [0x8160ce9]
  [0:4] _ZN12state_Switch10recvPacketEP6Packet+0x24  [0x8161134]
  [0:5] _ZN6Switch9ResolveFnEiPv+0xf1  [0x815f2b9]
  [0:6] _ZN6adapt44StepEv+0x34b  [0x81dc453]
  [0:7] _ZN3sim4StepEv+0xc0  [0x81d7f22]
  [0:8] _ZN6Switch10recvPacketEP6Packet+0x1e3  [0x81610cb]
  [0:9] _ZN14CkIndex_Switch23_call_recvPacket_PacketEPvP6Switch+0x18  [0x815d28c]
  [0:10] CkDeliverMessageFree+0x44  [0x822bc6d]
  [0:11] _ZN14CkLocRec_local11invokeEntryEP12CkMigratablePvib+0x13a  [0x8243246]
  [0:12] _ZN14CkLocRec_local7deliverEP14CkArrayMessage11CkDeliver_ti+0x1bc  [0x82434da]
  [0:13] _ZN8CkLocMgr7deliverEP9CkMessage11CkDeliver_ti+0x266  [0x8244980]
  [0:14] _ZN8CkLocMgr13deliverInlineEP9CkMessage+0x28  [0x8230d30]
  [0:15]   [0x822d7ac]
  [0:16] _Z15_processHandlerPvP11CkCoreState+0x1af  [0x822d961]
  [0:17] CmiHandleMessage+0x3c  [0x82bd27e]
  [0:18] CsdScheduleForever+0x6b  [0x82bd463]
  [0:19] CsdScheduler+0x11  [0x82bd3d5]
  [0:20]   [0x82bb8f5]
  [0:21] ConverseInit+0x342  [0x82bbe04]
  [0:22] main+0x44  [0x8234d5b]
  [0:23] __libc_start_main+0xe6  [0x670cc6]
  [0:24]   [0x815afc1]
Fatal error on PE 0> 

     How should I deal with it? Thank you, sir:-)